*Version 3.0.11, 14.12.2022
***BUGFIXING
**** PI-Controller -> Too early switch-off of the fan due to incorrect calculation of the I-component
***EXTENSION
**** Two new modbus register to read-out EnOcean temperature sensors 
**** New Software Specification Rev31
***ATTENTION
**** Version 3 is not compatible to version 2.x and 1.x!!!

*Version 3.0.10, 03.11.2022
***BUGFIXING
**** Heat pump function did not work since implementation of second control circuit
**** After returning from standby by center key the "Controller mode after reset" value was set and not a value specified via Modbus/BACnet
***ATTENTION
**** Version 3 is not compatible to version 2.x and 1.x!!!

*Version 3.0.9, 05.09.2022
***INFO
**** only BACnet devices
***BUGFIXING
**** Wrong type of Present Value (real instead of enum) at Binanry Inputs
**** Setpoints: Erroneous setpoint calculation when value default by Modbus and use of ECO- and Occupancy mode in parallel
**** File Object: Access to file object via IP did not work
***ATTENTION
**** Version 3 is not compatible to version 2.x and 1.x!!!

*Version 3.0.8, 30.06.2022
***BUGFIXING
**** EnOCean: KEycard Bugfix. The display switched on automatically
**** Parameter: Digital outputs: Direction cool output was not set correctly
***ATTENTION
**** Version 3 is not compatible to version 2.x and 1.x!!!


*Version 3.0.6, 23.03.2022
***BUGFIXING
**** EnOCean: SABs did not work
**** PWM for LED backgroung brightness
**** Wrong weekday calculation for sunday
***ATTENTION
**** Version 3 is not compatible to version 2.x and 1.x!!!


*Version 3.0.4, 25.01.2022
***BUGFIXING
**** Timechannel: periods higher period 1 did not work
**** Weekday: was not updated with beginning of new day
**** 
***ATTENTION
**** Version 3 is not compatible to version 2.x and 1.x!!!


*Version 3.0.2, 05.01.2022
***INTRODUCING NEW HARDWARE VERSION 
**** Release for Modbus-, BACnet- and 3DI-device
***BUGFIXING
**** Only EC-types!! Incorrect fan speed value when time channel switches back 
**** from ECO to comfort mode  
***ATTENTION
**** Version 3 is not compatible to version 2.x and 1.x!!!


*Version 2.6.4, 17.12.2021
***BUGFIXING
**** Only EC-types!! Incorrect fan speed value when time channel switches back 
**** from ECO to comfort mode  


*Version 2.6.3, 15.12.2021
***BUGFIXING
**** Optimized Controller mode display in main screen
**** BACnet with humidity accepts Configuration bin-files created with uConfig 3.1 


*Version 2.6.1, 02.07.2021
***BUGFIXING
**** Corrected pulse width modulation time when ymax < 100%
**** Corrected switch to fan stage after returning from unoccupied to occupied 


*Version 2.6.0, 03.12.2020
***NEW
**** Introducing rH type
**** Overtemperature protection with underfloor heating
**** Implementation of a 2nd control loop

*Version 2.4.2, 20.11.2020
***NEW
***BUGFIX
**** Fan follow up time with two point controller
*Version 2.4.1, 08.06.2020
***NEW
***BUGFIX
**** Time channels after uConfig configuration
**** csv-file version detection

*Version 2.4.0, 04.05.2020
***NEW
**** EnOcean functionality for user-defined keys
**** New function Center key: activate/deactivate ECO-mode
**** New function keys fan stage: without AUTO and without manual OFF
***BUGFIX
**** Timechannels: After configuring channels by uConfig periods 2-4 were not started
**** automatically, but only after reset


*Version 2.3.2, 24.03.2020
***BUGFIX
**** No response sent very first request after reset
***CHANGES
**** Setting "Max. heat load" and "Max cool load" removed from menu
**** Minor changes in menu handling

*Version 2.3.1, 10.12.2019
***NEW
**** Further display options in the main screen and in the setpoint adjustment screen


*Version 2.3.0, 22.11.2019
***NEW
**** JOY Custom: 
**** Custom graphics and logo reloadable via SD card 
**** User-defined key functions including feedback (Modbus devices only!) 
**** Extended menu for Modbus devices 
**** Feedback changeover status (Modbus devices !) 
**** Changed buttons for calling the "Cleaning Mode"
**** Fan coil follow-up-time
**** Alarm feedback via digital input
**** Configuration files for lower firmware versions can be loaded via SD card
   
*Version 2.2.1, 15.08.2019
***BUGFIX
**** Only for devices 'FC 5DO' and 'FC 5DO Modbus'
****  Wrong timing when setting new fan stage manually

*Version 2.2.0, 15.08.2019
***NEW
**** Generic 6-way valve (EC3AO, HC3AO, HCAO2DO)
**** EC-output continuous in AUTO-mode (EC)
**** Fan state as main screen

*Version 2.1.1, 28.03.2019
***NEW
***** Replaced EnOcean profiles A5-10-01 and A5-10-05 by A5-10-2 and A5-10-06
****  Support for Danfoss CO6 valve
*Version 2.1.0, 30.01.2019
***BUGFIX
***** RSSI level
***** SAB cooling mode
***** Crash in Learn Sensor menu
***NEW
***** Feedback battery capacity
***** Fan stage key configurable without MANUAL OFF
***** 2 inputs can be used in parallel as a keycard switch 

*Version 2.0.1, 29.11.2018
***ONLY FC/EC types
***** QC-test specific modifications

*Version 2.0.0, 29.11.2018
***FIRST RELEASE
